Windows 10 is a great operating system, but it can have some boot problems. Here are some tips to fix them. If your computer won’t start up at all, try these steps:
- Make sure you have a recent backup of your data and files.
- Try resetting your computer to its factory settings by following these instructions: a) Restart your computer and hold down the “R” key while you press the “F10” key to enter the BIOS (basic input/output system) screen; b) Select the “Restore Default Settings” option from the BIOS screen; c) Follow the on-screen instructions to complete the reset process.
- If none of these steps work, try troubleshooting your boot problem by following these steps: a) Check if you have installed any new hardware or software recently that could be causing problems; b) Try removing any unnecessary programs from your computer; c) Try using a different power supply if possible; d) If you’re using an optical drive, try disconnecting it and then reconnecting it; e) If you’re using a USB drive, try disconnecting and then reconnecting it to your computer; f) Try restarting your computer in Safe Mode with Networking enabled; g) Check for updates for Windows 10 or Microsoft software that could be causing problems. ..
You turn on your computer one day and Windows refuses to boot—what do you do? “Windows won’t boot” is a common symptom with a variety of causes, so you’ll need to perform some troubleshooting.
Modern versions of Windows are better at recovering from this sort of thing. Where Windows XP might have stopped in its tracks when faced with this problem, modern versions of Windows will try to automatically run Startup Repair.
First Things First: Has Anything Changed?
Be sure to think about changes you’ve made recently—did you recently install a new hardware driver, connect a new hardware component to your computer, or open your computer’s case and do something? It’s possible the hardware driver is buggy, the new hardware is incompatible, or that you accidentally unplugged something while working inside your computer.
If the Computer Won’t Power On At All
If your computer won’t power on at all, ensure it’s plugged into a power outlet and that the power connector isn’t loose. If it’s a desktop PC, ensure the power switch on the back of its case—on the power supply—is set to the On position. If it still won’t power on at all, it’s possible you disconnected a power cable inside its case. If you haven’t been messing around inside the case, it’s possible the power supply is dead. In this case, you’ll have to get your computer’s hardware fixed or get a new computer.
Be sure to check your computer monitor—if your computer seems to power on but your screen stays black, ensure your monitor is powered on and that the cable connecting it to your computer’s case is plugged in securely at both ends.
The Computer Powers On And Says No Bootable Device
RELATED: How to Boot Your Computer From a Disc or USB Drive
If your computer is powering on but you get a black screen that says something like “no bootable device” or another sort of “disk error” message, your computer can’t seem to boot from the hard drive that Windows was installed on. Enter your computer’s BIOS or UEFI firmware setup screen and check its boot order setting, ensuring that it’s set to boot from the correct hard drive.
If the hard drive doesn’t appear in the list at all, it’s possible your hard drive has failed and can no longer be booted from.
If everything looks fine in the BIOS, you may want to insert Windows installation or recovery media and run the Startup Repair operation. This will attempt to make Windows bootable again. For example, if something overwrote your Windows drive’s boot sector, this will repair the boot sector. If the recovery environment won’t load or doesn’t see your hard drive, you likely have a hardware problem. Be sure to check your BIOS or UEFI’s boot order first if the recovery environment won’t load.
You can also attempt to manually fix Windows bootloader problems using the fixmbr and fixboot commands. Modern versions of Windows should be able to fix this problem for you with the Startup Repair wizard, so you shouldn’t actually have to run these commands yourself.
If Windows Freezes or Crashes During Boot
RELATED: How to Fix Startup Problems with the Windows Startup Repair Tool
If Windows seems to start booting but fails partway through, you may be facing either a software or hardware problem. If it’s a software problem, you may be able to fix it by performing a Startup Repair operation. If you can’t do this from the boot menu, insert a Windows installation disc or recovery disk and use the startup repair tool from there. If this doesn’t help at all, you may want to reinstall Windows or perform a Refresh or Reset on Windows 8 or 10.
If the computer encounters errors while attempting to perform startup repair or reinstall Windows, or the reinstall process works properly and you encounter the same errors afterwards, you likely have a hardware problem.
If Windows Starts and Blue Screens or Freezes
If Windows crashes or blue screens on you every time it boots, you may be facing a hardware or software problem. For example, malware or a buggy driver may be loading at boot and causing the crash, or your computer’s hardware may be malfunctioning.
RELATED: How to Use Safe Mode to Fix Your Windows PC (and When You Should)
To test this, boot your Windows computer in safe mode. In safe mode, Windows won’t load typical hardware drivers or any software that starts automatically at startup. If the computer is stable in safe mode, try uninstalling any recently installed hardware drivers, performing a system restore, and scanning for malware. If you’re lucky, one of these steps may fix your software problem and allow you to boot Windows normally.
If your problem isn’t fixed, try reinstalling Windows or performing a Refresh or Reset on Windows 8 or 10. This will reset your computer back to its clean, factory-default state. If you’re still experiencing crashes, your computer likely has a hardware problem.
RELATED: Beginner Geek: How to Reinstall Windows on Your Computer
How to Recover Files When Windows Won’t Boot
RELATED: How to Recover Files From a Dead Computer
If you have important files that will be lost and want to back them up before reinstalling Windows, you can use a Windows installer disc or Linux live media to recover the files. These run entirely from a CD, DVD, or USB drive and allow you to copy your files to another external media, such as another USB stick or an external hard drive.
If you’re incapable of booting a Windows installer disc or Linux live CD, you may need to go into your BIOS or UEFI and change the boot order setting.
If even this doesn’t work—or if you can boot from the devices and your computer freezes or you can’t access your hard drive—you likely have a hardware problem. You can try pulling the computer’s hard drive, inserting it into another computer, and recovering your files that way.
Following these steps should fix the vast majority of Windows boot issues—at least the ones that are actually fixable. The dark cloud that always hangs over such issues is the possibility that the hard drive or another component in the computer may be failing.
Image Credit: Karl-Ludwig G. Poggemann on Flickr, Tzuhsun Hsu on Flickr
